A “North” system by ProFurl. 3/8″ pins
-(5) 200mm extrusions, (1) shorter extrustion
-connectors/bushings
-swivel
-drum
-hardware
↧
ProFurl, headsail furler 40′
↧
Harken Unit 1, MkIII Furler, 56′ of extrusions
5/16″ clevis pins
-(8) 84″ extrusions, 2 shorter pieces
-swivel
-drum
-hardware
↧
↧
Headsail Furler, Hood 810 Seafurl, 42′ of extrusion
Hood Furler in decent shape, still operates nicely.
(6) extrusions
(12) connectors
bushing
swivel
drum
↧
Hood Seafurl
Hood Seafurl 810 HD was removed from a 32 ft ericson. Can fit any boat.
↧
Harken #1 Roller furling
Harken #1 Roller furling
↧
↧
Harken #0 Roller Furling
Harken #0 Roller Furling
↧
HOOD OLD STYLE FURLING COMPONENTS
Boaters’ Resale Shop of Tx 1602 1771.15 HOOD OLD STYLE FURLING COMPONENTS * ITEM WAS PRE-OWNED, USED, WEATHERED AND HAS NOT BEEN TESTED
$199.99
Purchase here and more details
↧
SCHAEFER ROLLER FURLER WITH 1/4″ PIN
Boaters’ Resale Shop Of Tx 1508 0255.02 SCHAEFER ROLLER FURLER WITH 1/4″ PIN * APPROX. OVERALL DRUM DIAMETER: 4-1/2″ * ITEM WAS PRE-OWNED, USED, IN FAIR PHYSICAL CONDITION BUT HAS NOT BEEN TESTED
$129.99
Purchase here and more details
↧
Roller Furller for 36′
EXCELLENT CONDITION
FROM A CAPE DORY 36′
ALL PARTS AND CONNECTORS
FURLING LINE
READY TO INSTALL
↧
↧
Harken MKIII Jib Reefing & Furling System Unit 1
Harken MKIII Jib Reefing & Furling System Unit 1 -This is nearly a complete system. All the original components are included along the manual and a 1X19 forestay that has a length of 46′ 5″ and comes with a Stay lok fitting. The only additional things needed for installation would be the extrusions(7), the bottom tube, regular and bottom connectors, foil wedges, Locktite, top foil trip cap (if desired)- all of which are available from Harken who has set the standard in jib furling systems
↧
roller furlers
Selden furlex 8′ drum 49′-7″
Schaefer snapfurl 700 6″ drum 39′
Harken 6″ drum 46′-4″
Harken mrk III 7″ drum 40′-2″
Harken 7″ drum 50′-9″
All are approximate sizes and all are assembled and will need special transportation dissassembly or local pickup 914-636-1524 Jon
↧
Harken Mark III Unit 4 Furling Unit
Harken Mark III Unit 4 Roller Furler. This is a large furling unit off of a 60’+ vessel.
It still functions. A few of the foils need to be recut, but are definitely serviceable.
Overhauled by Harken in 2013.
↧
HARKEN ESP – JIB FURLER/REEFING UNIT – NEW
DESCRIPTION
Unfurl and trim safely from the cockpit when it’s windy or light.
ESP Furlers are designed for the daysailor and coastal cruiser looking for an easy-to-assemble furler with an elegant design. Trim safely from the cockpit when it blows, and unfurl instead of motoring when it’s light, for a great day of sailing.
Easy assembly and installation: Foils slip over the standard marine eye and headstay wire for easy installation. The adjustable bottom foil fine-tunes the system length. Shackle at the tack and head attach the sail to the furler, with sail shape controlled by halyard tension. No need to cut the headstay during installation.
Stands up to the elements: The drum is made from Hard Lube-anodized aluminum. Cover, flange and guard are glass-reinforced polymers for high strength. Foils are clear-coat anodized for durability. Stainless steel sail feeder is strong and durable.
↧
↧
Mainsail Reefing System – Approximate 45′
Mainsail Reefing System – Approximate 45′
↧
Harken MKIV Unit 1 Jib Reefing and Furling
I purchased the wrong size and could not return with-in the 30day time frame. My mistake your gain at a 300+ dollar reduction off original price. This unit is NEW never put into service and not even put together, It’s still in the original mfg boxing.
MKIV furling systems are strong, lightweight and aerodynamic, with the performance and features Harken® is known for. Longevity, ease of use and simplicity of installation are crucial components of the design. These free-rolling furlers make all the difference in headsail control by allowing racers and cruisers to quickly furl and reef from the safety of the cockpit, while maintaining great sail shape and optimal speed.
Halyard Swivel Turns Freely Strong, lightweight halyard swivel reduces windage and weight aloft to minimize pitching and heeling. Stacked bearing races evenly distribute radial and thrust loads to ball bearings; foils turn freely under halyard loads. Independent halyard and tack swivels furl sail center before head and tack for improved sail shape and upwind pointing.
Drum Installs Over Existing Turnbuckle Units are adaptable to a variety of rigging options for easy installation. Harken toggle assembly accepts standard turnbuckle using swage, rod, Norseman® or Sta-Lok® terminals. Toggle flips for fork or tang chainplate installation. A single stainless steel clevis pin provides access to the turnbuckle for adjustment.
Stainless Steel Feeder Stainless steel feeder allows fast singlehanded hoist and quick sail changes.
Removable Split Drum Line guard and spool come off easily for racing.
Part Number: 7411.10
↧
Harken Unit 1, MkIII Furler, 56′ of extrusions
5/16″ clevis pins
-(8) 84″ extrusions, 2 shorter pieces
-swivel
-drum
-hardware
↧
ProFurl, headsail furler 40′
A “North” system by ProFurl. 3/8″ pins
-(5) 200mm extrusions, (1) shorter extrustion
-connectors/bushings
-swivel
-drum
-hardware
↧
↧
HARKEN SERIES 1-489 BIG BOAT JIB REEFING & FURLING FURLER SYSTEM W/ BOTH ROLLERS
HARKEN SERIES 1-489 BIG BOAT JIB REEFING & FURLING FURLER SYSTEM W/ BOTH ROLLERS
HARKEN SERIES 1-489 JIB REEFING AND FURLING SYSTEM WITH TOP AND BOTTOM ROLLERS. IF YOU DON’T FIND WHAT YOU’RE LOOKING FOR I HAVE A TON OF OTHER FURLING SYSTEMS AVAILABLE THAT AREN’T LISTED IN THE WAREHOUSE!
APPROXIMATE MEASUREMENTS
-FOIL SIZE-
FOIL WIDTH: 7/8″
FOIL LENGTH: 1 1/8″
CABLE: 5/8″ +
-BOTTOM ROLLER-
DRUM WIDTH: 7 1/2″
DRUM HEIGHT: 3 1/4″
TOTAL HEIGHT: 16″
CLEVIS PIN: 1/2″ (EXACT DIAMETER SEEMS TO BE 17/32″)
-TOP ROLLER-
LENGTH: 6 3/4″
WIDTH: 3″
WIDTH W/ SHACKLE MOUNTS: 3 3/4″
↧
Complete Harken Unit 0 MKIII Headsail Furler Unit
For sale is a Harken Unit 0 MKIII furler unit
Currently sits on and fits a Catalina 27
Comes complete with drum, foils, and swivel
Asking $1000
↧
N & J Marine – Complete Unit 1 MKIII Headsail Furling Unit
Furler has been in freshwater for its lifetime
Currently sits on and fits a Tartan 30
Comes complete with drum, foils, and swivel
Asking 00
↧